EGR Delete Cable - Mazda BT50 with 3.0 engine
EGR Delete Cable - Mazda BT50 with 3.0 engine
The vehicle EGR (Exhaust Gas Recirculation) system reduces engine emissions but has some inherent compromises regarding engine efficiency and reliability. The system works by recirculating exhaust gasses back into the combustion chamber during low engine loads (typically from idle to half throttle) the valve opens and some of the already burned exhaust gases are sent back to the intake to get mixed with fresh air and are combusted for a second time. The combustion temperatures are reduced which in turn reduces the NOx (Nitrogen Oxide) emissions.
Failure often occurs when the dirty exhaust gasses clog up the valve causing it to stick in the open position, when this happens the engine is starved of oxygen and becomes sluggish and inefficient, in some cases the vehicle can become almost undriveable. The EGR valves can also fail electronically when the internal motor or position sensors fail. Over time the wet burned gases layer themselves on the hot intake ports of the head and build up to significantly block the ports and reduce the ability of the engine to breathe.
Installing an EGR delete cable is an important component of professional diesel tuning systems for your Mazda BT50 3.0 engine.